Use of metal detectors and metal separators

February 01, 2024

The metal detector is used to detect metal impurities mixed in the production process of plastics, chemicals, food, medicine, cosmetics, textiles, etc.

Metal detectors separate these metal impurities from raw materials or recycled materials. Used in plastic recycled materials. As the plastic nozzle material is processed by the pulverizer, some metal fragments or particles are mixed. Designed to prevent blockages in off-line production.

How is plastic and metal separated?

Metal trap

The pulverized waste is piped, and metal scraps having a diameter of 0.75 to 1.2 MM are separated using a metal trap during the transfer.

2. Electrostatic separator

The mixed material is pulverized and put into an electrostatic separator, and metal such as copper or aluminum can be separated by using different charging characteristics of metal and plastic. This method is applicable to the treatment of metal-filled composite materials, cable materials and metal-plated plastics.

3. Dissolution separation

The plastic coated metal part is immersed in a suspension containing methylene chloride, a nonionic surfactant, paraffin and water to dissolve and separate the plastic coating.

4. Brittle separation

The metal and plastic hybrid waste is cooled to the embrittlement temperature of the plastic, then pulverized, and the metal is separated from the plastic by a wind screen separation method.

5. Stripping of cable sheath

The outer skin materials of wires and cables are mainly polyvinyl chloride, polyethylene (including cross-linked polyethylene) and synthetic rubber and natural rubber. In addition to the above electrostatic separation method, there are two methods of dry and warm methods to make plastic and rubber. Effectively separated from copper and aluminum core wires.

(1) Dry separation: The inside of the cable is uniformly heated by a far-infrared device, and the outer skin is manually peeled off.

(2) Wet separation: The aluminum wire is immersed in a solution of a penetrating agent (surfactant), heated to 70-90 degrees, and then peeled off the skin, and then continuously washed with an organic solvent several times to completely remove the tar.

Nous contalit

Auteur:

Mr. Yan

E-mail:

sales@tinboxtlt.com

Phone/WhatsApp:

+8618098231343

Produits populaires

Actualités

Le thé peut être emballé, 80% des personnes choisissent l'emballage en fer?

December 09, 2022

Quelles sont les méthodes d'impression des canettes en étain?

December 01, 2022

Nouvelles de l'industrie

Quelle est la valeur de la personnalisation des boîtes de fer

April 30, 2024

Pourquoi une boîte en étain doit-elle être transformée en un plat et inégal

April 23, 2024

Blog News

Metal Slitting Machine/Metal Precision Slitting Line/Metal Slitting Line

November 18, 2023

Metal Coil Metal Cut to Length Line/Metal Cut to Length

November 18, 2023

Vous pouvez aussi aimer

Catégories connexes

Envoyer à ce fournisseur

Sujet:

E-mail :

message:

Votre message MSS

Nous contalit

Auteur:

Mr. Yan

E-mail:

sales@tinboxtlt.com

Phone/WhatsApp:

+8618098231343

Produits populaires

Actualités

Le thé peut être emballé, 80% des personnes choisissent l'emballage en fer?

December 09, 2022

Quelles sont les méthodes d'impression des canettes en étain?

December 01, 2022

Nouvelles de l'industrie

Quelle est la valeur de la personnalisation des boîtes de fer

April 30, 2024

Pourquoi une boîte en étain doit-elle être transformée en un plat et inégal

April 23, 2024

Blog News

Metal Slitting Machine/Metal Precision Slitting Line/Metal Slitting Line

November 18, 2023

Metal Coil Metal Cut to Length Line/Metal Cut to Length

November 18, 2023